Description

The World Housing Encyclopedia (WHE) Report Database contains 130 reports on housing construction types in 43 seismically active countries. Each housing report is a detailed description of a housing type in a particular country. The description is prepared from a number of standard closed-ended questions and some narrative that have been provided by report authors. Each report has five major categories including architectural and structural features; Building Materials and Construction Process; Socio-economic Issues; Past Performance In Earthquakes, Seismic Features and Vulnerability; and Retrofit. All of the housing reports in this database have been contributed by volunteers. If you are interested in writing a housing report please contact the WHE Editorial Board.

About

The World Housing Encyclopedia (WHE) is a collection of resources related to housing construction practices in the seismically active areas of the world. The mission is to share experiences with different construction types and encourage the use of earthquake-resistant technologies worldwide. The technical activities of the WHE are steered by an international team of 22 professionals specializing in different aspects of seismic safety of buildings and structures. They bring relevant experience from 16 seismically active countries across the world. For more information about the World Housing Encyclopedia, visit http://www.world-housing.net/.

General Information

 

Report #:6
Building Type: Concrete frame and shear wall building
Country: Chile
Author(s): Ofelia Moroni
Cristian Gomez
Last Updated:
Regions Where Found: Buildings of this construction type can be found in all main cities of the country: Iquique, Antofagasta, Concepcion,Temuco, Valparaiso, Vina del Mar and Santiago. This type of housing construction is commonly found in urbanareas.
Summary:

Buildings of this type are used mainly for offices or ...

Length of time practiced: 25-60 years
Still Practiced: Yes
In practice as of:
Building Occupancy: Mixed residential/commercial
Typical number of stories: 10-30
Terrain-Flat: Typically
Terrain-Sloped: Off
Comments: In some buildings commercial ground floor includes a big hall.


 

Features

 

 

Plan Shape Rectangular, solidOther
Additional comments on plan shape From rectangular to octagonal.
Typical plan length (meters) 20
Typical plan width (meters) 40
Typical story height (meters) 3.2
Type of Structural System Structural Concrete: Moment Resisting Frame: Dual system Frame with shear wall
Additional comments on structural system The vertical load-resisting system is reinforced concrete structural walls (with frame). Shear walls and frames play bothrole as both the lateral and gravity load-bearing elements. In addition, gravity load-resisting beams may exist.The lateral load-resisting system is reinforced concrete structural walls (with frame). Shear walls provide enoughstrength and stiffness to control displacements in the lower floors while the frames control displacements in the upperfloors. In some cases the walls are coupled with lintel beams, which are able to dissipate energy when subjected tosevere earthquakes and are easily repairable afterwards. In general these buildings are quite stiff because they must resista base shear of 5 - 6.7% depending on the seismic zone and the story drift must be equal or less than 0.002. The faadeframes may not be linked to the stair or elevator walls, in which case the slab must transfer lateral loads from oneelement to the other. Stiffness and mass distribution are regular in plan but some irregularities may appear at the topfloors due to reduction in floor area. Most of them may have symmetry axes in at least one direction of the plan. Theratio Total Height/Period (H/T) has been defined as representative of building stiffness, being normal valuesbetween 40 to 70 m/sec. However, in the last decade this value had diminished and about 7% of the buildings haveH/T between 20 to 40 m/sec. This may lead to larger story drift and damage due to earthquakes.
Gravity load-bearing & lateral load-resisting systems
Typical wall densities in direction 1 1-2%
Typical wall densities in direction 2 1-2%
Additional comments on typical wall densities Ranges from 1.5% to 2.5% in each direction. Only 25% buildings of this type have wall density less than 1.5% but larger than 0.5%. Figure 8 shows the variation with time of the wall density.
Wall Openings In this country there is not standardization for any element: window, door, etc, so it is not possible to provide any number or size of openings.
Is it typical for buildings of this type to have common walls with adjacent buildings? No
Modifications of buildings The most popular may be infill balconies.
Type of Foundation Shallow Foundation: Reinforced concrete strip footingShallow Foundation: Mat foundation
Additional comments on foundation Probably the mat foundation is more typical as most of these buildings possess a basement.
Type of Floor System Other floor system
Additional comments on floor system Floor system(s): Structural concrete: cast in place solid slabs, post-tensioned slabs, precast solid slabs The floors and the roof are considered as rigid diaphragms for seismic analysis. With post-tensioned slab larger span between the central core walls (elevators and stairs) and some frames can be used.
Type of Roof System Roof system, other
Additional comments on roof system Roof system(s): Structural concrete: cast in place solid slab, precast solid slabs; Timber: wood planks or beams with ballast and concrete or plaster finishing, wood planks or beams that support slate, metal, asbestos-cement or plastic corrugated sheets or tiles, wood planks or beams supporting natural stones slates The floors and the roof are considered as rigid diaphragms for seismic analysis. With post-tensioned slab larger span between the central core walls (elevators and stairs) and some frames can be used.
Additional comments section 2 According to NCH433.of96 it must be at least 1.5 cm or 0.002*total height of the building. In addition, there are some dispositions about distance to neighbor site or free space for parking. So, individual buildings in a block may be separated up to 10 meters. These are typically located close together in some specific neighborhoods. In Santiago there are some new developed neighborhood where corporate buildings are widely spaced.

 

Building Materials and Construction Process

 

 

Description of Building Materials


Structural Element Building Material (s)Comment (s)
Wall/Frame Reinforced Concrete Characteristic Strength- 1.5-4.0/25-35/1.5-2.0 st/f'c/shear strengthMix Proportion/Dimensions- 3:1:0.5
Foundations Reinforced Concrete Characteristic Strength: 1.4-2.2/25/1.5 st/f'c/shear strengthMix Proportion/Dimensions: 3:1:0.5
Floors Reinforced Concrete Cylinder compressive strength of concrete: 25-30 MPa
Roof Reinforced Concrete Cylinder compressive strength of concrete: 25-30 MPa
Other

Design Process


Who is involved with the design process? EngineerArchitect
Roles of those involved in the design process The landowner and a construction firm (developer) hire an architectural office and structural engineer to design the building. Modern equipment such as crane, premix concrete, industrial formwork etc. is used in the construction.The construction of this type of housing takes place in a singlephase. Typically, the building is originally designed for its final constructed size.
Expertise of those involved in the design process The structural engineer typically has a background consisting of 6 years of academic studies and more than 3-5 years of experience. The construction engineer may have 6 years of studies and less experience than the structural engineer. The inspection during the construction is not mandatory and there is no peer review of the structural project. The designer may visit the construction site once or twice during the construction.

Construction Process


Who typically builds this construction type? Other
Roles of those involved in the building process It is built by developers or as initiative of a firm or a hotel.
Expertise of those involved in building process
Construction process and phasing This building is not typically constructed incrementally and is designed for its final constructed size.
Construction issues The main problems are associated to the construction process: construction joints badly done or existence of honeycombs.

Building Codes and Standards


Is this construction type address by codes/standards? Yes
Applicable codes or standards Nch433.of96 Seismic Design Until 1993 the NCh433.of72 was in force. The last two numbers indicates the year since the code is in force. Provisional dispositions to design this type of buildings existed since 1966. The most recent code/standard addressing this construction type was issued 1996. Applicable national building code, material codes and seismic code/standards: Nch 433.of96 Seismic design of Buildings. The design of structural elements follows ACI 318-95, with some exceptions: reduced reinforcement cover, non-confinement at the wall ends, 16 Mpa minimum compressive strength.B.2.1 Appendix of the NCH433.0f96 Seismic Design of Buildings says: "The design of frames in buildings with "Frame with concrete shear walls-dual system", must follow at least ACI318-95 dispositions 21.8.4 and 21.8.5 when the 75% or more of the story shear in any direction of analysis is resisted by the shear walls and any frame individually resists less than 10% of the story shear. The same may apply when the seismic forces acting on the building are calculated with a reduced modification factor".B.2.2 says: "The shear wall design doesn't need to follow dispositions 21.6.6.1 to 21.6.6.4 of ACI318-95."
Process for building code enforcement The building design must follow the NCh433.of96 code, although nobody checks this. In case of damage an arbitrage process may take place at the court of justice.

Building Permits and Development Control Rules


Are building permits required? Yes
Is this typically informal construction? No
Is this construction typically authorized as per development control rules? Yes
Additional comments on building permits and development control rules

Building Maintenance and Condition


Typical problems associated with this type of construction
Who typically maintains buildings of this type? Owner(s)Renter(s)
Additional comments on maintenance and building condition

Construction Economics


Unit construction cost For an standard building construction may be 15 - 30 UF/m2 (400 - 800 US/m2 ). Selling price will be 40 - 50 UF/m2(1,050 - 1,400 $US/m2). In the last years, "intelligent buildings" had been constructed that include air conditioning,computer, energy-savings devices, etc. For this case the construction cost may be up to 30-45 UF/m2 (800 - 1,225$US/m2). Selling price will be 50 - 70 UF/m2 (1,400 - 1,850 $US/m2).
Labor requirements Nowadays this is quite rapid, probably one or two floors per month.
Additional comments section 3

 

Socio-Economic Issues

 

 

Patterns of occupancy These are mainly office buildings and therefore nobody resides in them with the exception of some administrative workers unless the building is used as a hotel.Each building typically has 21-50 housing unit(s). One institution may own one or more floors.
Number of inhabitants in a typical building of this construction type during the day >20
Number of inhabitants in a typical building of this construction type during the evening/night 5-10
Additional comments on number of inhabitants During the day the building will have complete occupancy, however some buildings may also be occupied in the night (night shifts).
Economic level of inhabitants High-income class (rich)
Additional comments on economic level of inhabitants We are identifying the entrepreneurs or the owners of the offices, not the people working in these buildings.Ratio of housing unit price to annual income: 1:1 or better
Typical Source of Financing Owner financedPersonal savingsCommercial banks/mortgagesInvestment poolsOther
Additional comments on financing Other: Government owned offices.
Type of Ownership RentOwn outrightOwn with debt (mortgage or other)Units owned individually (condominium)Owned by group or poolLong-term lease
Additional comments on ownership
Is earthquake insurance for this construction type typically available? Yes
What does earthquake insurance typically cover/cost Earthquake insurance are optional added to fire insurance. In case of damage, this insurancewill cover repair work and contents.
Are premium discounts or higher coverages available for seismically strengthened buildings or new buildings built to incorporate seismically resistant features? No
Additional comments on premium discounts
Additional comments section 4

 

Earthquakes

 

 

Past Earthquakes in the country which affected buildings of this type


YearEarthquake Epicenter Richter Magnitude Maximum Intensity
1960Valdivia, X Region
1985Llolleo
9.5XI (MMI)
7.8VIII (MMI)

Past Earthquakes


Damage patterns observed in past earthquakes for this construction type In the southern part of Chile, buildings of this type did not exist at the time of the 1960 earthquake, and the only reported example of damage is the hospital in Valdivia.In the 1985 earthquake, structural damage was not reported in buildings of this type with the exception of the San Antonio Hospital, located very close to epicenter. Out of plane tilting occurred in some non-structural masonry walls at the third floor level (Figure 9) and some columns, not properly confined, in the first floor were damaged at the top. (Figures 9,10 and 11). In fact there were two building blocks-one of them was 3-story high and one basement with no damage, whereas the other one was 4 story high with a flower stand on the top floor that was damaged.The other photo (Figure 12) represent a 4-story buildings at Valparaiso that had experienced some damage in interior panel and contents.
Additional comments on earthquake damage patterns Overall damage patterns observed in past earthquakes for this type of construction, in its frame element, were a tilt out of plane of non-structural elements and short column failures.

Structural and Architectural Features for Seismic Resistance


The main reference publication used in developing the statements used in this table is FEMA 310 “Handbook for the Seismic Evaluation of Buildings-A Pre-standard”, Federal Emergency Management Agency, Washington, D.C., 1998.

The total width of door and window openings in a wall is: For brick masonry construction in cement mortar : less than ½ of the distance between the adjacent cross walls; For adobe masonry, stone masonry and brick masonry in mud mortar: less than 1/3 of the distance between the adjacent cross walls; For precast concrete wall structures: less than 3/4 of the length of a perimeter wall.
Structural/Architectural Feature Statement Seismic Resistance
Lateral load pathThe structure contains a complete load path for seismic force effects from any horizontal direction that serves to transfer inertial forces from the building to the foundation.TRUE
Building Configuration-VerticalThe building is regular with regards to the elevation. (Specify in 5.4.1)TRUE
Building Configuration-HorizontalThe building is regular with regards to the plan. (Specify in 5.4.2)TRUE
Roof ConstructionThe roof diaphragm is considered to be rigid and it is expected that the roof structure will maintain its integrity, i.e. shape and form, during an earthquake of intensity expected in this area.TRUE
Floor ConstructionThe floor diaphragm(s) are considered to be rigid and it is expected that the floor structure(s) will maintain its integrity during an earthquake of intensity expected in this area.TRUE
Foundation PerformanceThere is no evidence of excessive foundation movement (e.g. settlement) that would affect the integrity or performance of the structure in an earthquake. TRUE
Wall and Frame Structures-RedundancyThe number of lines of walls or frames in each principal direction is greater than or equal to 2.TRUE
Wall ProportionsHeight-to-thickness ratio of the shear walls at each floor level is: Less than 25 (concrete walls); Less than 30 (reinforced masonry walls); Less than 13 (unreinforced masonry walls);TRUE
Foundation-Wall ConnectionVertical load-bearing elements (columns, walls) are attached to the foundations; concrete columns and walls are doweled into the foundation.TRUE
Wall-Roof ConnectionsExterior walls are anchored for out-of-plane seismic effects at each diaphragm level with metal anchors or straps. TRUE
Wall OpeningsN/A
Quality of Building MaterialsQuality of building materials is considered to be adequate per the requirements of national codes and standards (an estimate). TRUE
Quality of WorkmanshipQuality of workmanship (based on visual inspection of a few typical buildings) is considered to be good (per local construction standards).TRUE
MaintenanceBuildings of this type are generally well maintained and there are no visible signs of deterioration of building elements (concrete, steel, timber).TRUE

Additional comments on structural and architectural features for seismic resistance
Vertical irregularities typically found in this construction type Torsion eccentricity
Horizontal irregularities typically found in this construction type Soft/weak storyChange in vertical structure
Seismic deficiency in walls None
Earthquake-resilient features in walls The main characteristic of Chilean buildings is the high wall density ratio.
Seismic deficiency in frames Non-structural elements not properly separated from the structures.
Earthquake-resilient features in frame
Seismic deficiency in roof and floors Some damage has been reported in slab with openings, i.e. between stairs and elevators, when there are not lintels and the slab works as a coupling element if no special reinforcements have been provided.
Earthquake resilient features in roof and floors
Seismic deficiency in foundation
Earthquake-resilient features in foundation

Seismic Vulnerability Rating


For information about how seismic vulnerability ratings were selected see the Seismic Vulnerability Guidelines

High vulnerabilty Medium vulnerabilityLow vulnerability
ABCDEF
Seismic vulnerability class |- o

Additional comments section 5

Retrofit Information

 

Description of Seismic Strengthening Provisions


Structural Deficiency Seismic Strengthening
Short column To separate the non-structural elements from the column
Non-structural elements connections To provide support against out of plane deformations

Additional comments on seismic strengthening provisions
Has seismic strengthening described in the above table been performed? The hospital at San Antonio was repaired; however, the details are not available.
Was the work done as a mitigation effort on an undamaged building or as a repair following earthquake damages? This is not a common activity in Chile. The only situation when buildings are repaired is after an earthquake, when some constructive deficiencies appeared. It is normal to observe some small cracks in the concrete.
Was the construction inspected in the same manner as new construction?
Who performed the construction: a contractor or owner/user? Was an architect or engineer involved? A contractor performed the construction, of course an architect and engineer were involved.
What has been the performance of retrofitted buildings of this type in subsequent earthquakes? Since 2001, no subsequent earthquake has occurred in the central zone of Chile.
Additional comments section 6

 

References

Ingenieria Sismica: El caso del sismo del 3 de marzo de 1985", (1993) ed. por Rodrigo Flores Bonelli, P. (1986), "Actividades de Investigacion, 1986", Universidad Tcnica Federico Santa Maria, Edicion especial.


Gomez Cristian, (2001), "Caracterizacion de sistemas estructurales usados en las viviendas de hormigon armado y albanileria reforzada en Chile", Civil Engineer Thesis, Universidad de Chile.


Guzman, M. (1998), "Caracterizacion de tipologias estructurales usadas en el diseno de edificios altos en Chile",Civil Engineer Thesis, Universidad de Chile


Kupfer, M., Lagos R., (1999), "Apuntes para el curso CI52G, Proyecto de Hormigon Armado", Depto de Ing. Civil, Universidad de Chile.


Moroni, M., Guzman M., (1998) "Evolucion de las Tipologias Estructurales usadas en Chile en Edificios Altos", Boletin de Informacion Tecnologica, Ano 5, No 12, pp 25-27.


Munoz, C. (1999), "Aplicacion de diferentes criterios de diseno de marcos de hormigon armado pertenecientes a sistemas estructurales mixtos (muros y marcos)" Civil Engineer Thesis, Universidad de Chile Sarrazin, M. (1992)


"History of Chilean Seismic Regulations", Bulletin IISEE, Vol 26.


Authors



Name Title Affiliation Location Email
Ofelia Moroni Civil Engineer/Associate Professor University of Chile Casilla 228/3, Santiago Chile mmoroni@cec.uchile.cl
Cristian Gomez Civil Engineer/Research Assistant University of Chile Casilla 228/3, Santiago Chile crgomez@cec.uchile.cl

Reviewers


Name Title Affiliation Location Email
Sergio Alcocer Director of Research Circuito Escolar Cuidad Universitaria, Institute of Engineering, UNAM Mexico DF 4510, MEXICO salcocerm@iingen.unam.mx